Intraoral Radiographic Techniques- Introduction (Chapter 1)

Introduction
Radiography involves the use of x-radiation and thus is potentially dangerous if mishandled. For your own sake, and that of the staff, patient, and public, it is essential that you gain adequate knowledge of radiographic techniques and radiation health and safety, prior to performing clinical procedures.
This course is intended to provide current, vital information on film and tube head placement, to serve as a guide to acquire new skills or refine current skills, and allow you to test yourself as you progress through the pages.
When you complete a continuing education course on the Dental ResourceNet, a form will come up that requests your name, address, etc.  If you are a member of the AGD, make sure to fill out the field that asks for your AGD membership number (if you are not an AGD member, leave blank).  When you hit submit, a copy of the "proof of completion" is e-mailed directly to the AGD and P&G. For your records, make sure to print a copy of the "proof of completion" certificate.

Overview
Radiography involves the use of x-radiation and thus is potentially dangerous if mishandled. For your own sake, and that of the staff, patient, and public, it is essential that you gain adequate knowledge of radiographic techniques and radiation health and safety, prior to performing clinical procedures.
This course is intended to provide current, vital information on film and tube head placement, to serve as a guide to acquire new skills or refine current skills, and allow you to test yourself as you progress through the pages

Objectives of this Article
Upon the completion of this Article, the dental professional will be able to:

• Understand the basic principles and concepts of intraoral procedures.
• Demonstrate the paralleling technique of intraoral radiology.
• Explain the bisecting angle technique of intraoral radiology.
• Identify proper techniques for bitewing radiography.
• Describe intraoral occlusal techniques.

Article Contents

• Introduction
• Intraoral Procedures
• Paralleling Technique
• Paralleling Technique Methodology
• The Bisecting Angle Technique
• Bisecting Angle Methodology
• Bitewing Radiography
• Intraoral Occlusal Radiography
• Digital Radiology
• Summary
• Glossary
• Course Test
• About the Authors

Introduction

Radiography involves the use of x-radiation and thus is potentially dangerous if mishandled.  For your own sake, and that of the staff, patient, and public, it is essential that you gain adequate knowledge of radiographic techniques and radiation health and safety, prior to performing clinical procedures. 
This course is intended to provide current, vital information on film and tube head placement, to serve as a guide to acquire new skills or refine current skills, and allow you to test yourself as you progress through the pages.

Intraoral Procedures

Introduction
The intraoral radiograph, when correlated with the case history and clinical examination, is one of the most important diagnostic aids available to the dental practitioner.  When examined under proper conditions, diagnostic-quality intraoral radiographs reveal evidence of disease that cannot otherwise be found. They also play a major role in forensic identification.
Two of the fundamental rules of radiography are that 1) the central beam should pass through the area to be examined, and 2) the x-ray film should be placed in position so as to record the image with the least amount of image distortion. Each of three types of intraoral radiologic examinations commonly used in dental practice—periapical, bitewing (interproximal), and occlusal examinations—depend on the operator’s adherence to these two rules even though specific techniques, processes, and indications differ widely among them.
Another aspect that these three examinations have in common pertains to the film packet.  The film packet has two sides, a tube side and a tongue side.  The tube side may be plain or textured.  When placed intraorally, the tube side always faces the radiation source, the tube head.  The tongue side may be colored and has a flange to open the packet and remove the film.  When placed intraorally, the tongue side always faces the patient’s tongue, except in the case of the mandibular occlusal examination.
Because of patient anatomic variations such as narrow arches, missing teeth, or the presence of tori, and limitations of the patient’s ability to open sufficiently (caused by age or other factors), or maintain the film placement, a clinical examination must precede the taking of films.  After the clinical examination, the operator can determine the number and size of films to expose, the technique modifications necessary, and the type of film retention devices to be employed.
Advancements are continually being made in the development and manufacturing of the actual film packet.  These advancements have helped to decrease radiation exposure.  Whenever possible the "fastest" film speed should be used.

Periapical Radiographs

The purpose of the intraoral periapical examination is to obtain a view of the entire tooth and its surrounding structures, as in Figure 1.  Two exposure techniques may be employed for periapical radiography: the paralleling technique and the bisecting angle technique.  The paralleling technique is the preferred method.  This technique provides less image distortion and reduces excess radiation to the patient.  The paralleling technique should always be attempted before other techniques.  The bisecting technique can be employed for patients unable to accommodate the positioning of the paralleling technique.  Candidates may include those with low palatal vaults and children.  Disadvantages to the bisecting technique include image distortion and excess radiation due to increased angulations involving the eye and thyroid glands.  Regardless of the technique, however, the rules of radiography referred to earlier must be followed.

 

Figure 1

Bitewing Radiographs
Bitewing examinations were introduced by Raper in 1925.  The greatest value of bitewing radiographs is the detection of interproximal caries in the early stages of development, before it is clinically apparent.  The arrows in Figure 2 indicate areas of interproximal caries.  Bitewing projections also reveal the size of the pulp chamber and the relative extent to which proximal caries have penetrated.
Bitewings also provide a useful adjunct to evaluating periodontal conditions, offer a good view of the septal alveolar crest, and, in addition, permit changes in bone height to be accurately assessed by comparison with adjacent teeth.  Bitewings do not show the apices of the teeth and cannot be used to diagnose in this area.

 

Figure 2

Occlusal Radiographs

Occlusal radiography is a supplementary radiographic examination designed to provide a more extensive view of the maxilla and mandible (Figure 3).

 

Figure 3

The occlusal radiograph is very useful in determining the buccolingual extension of pathologic conditions, and provides additional information as to the extent and displacement of fractures of the mandible and maxilla.  Occlusals also aid in localizing unerupted teeth, retained roots, foreign bodies, and calculi in the submandibular and sublingual salivary glands and ducts.  It should be noted that when imaging soft tissues exposure time needs to be appropriately reduced.

Dentulous Adult Survey
The number of films needed for a full mouth series varies greatly.  Some practitioners may prefer 10 films, while others may prefer 18, 20 or more exposures.
The selection of film sizes used in a full mouth series also varies.  A full survey can consist of narrow anterior film (size #1); standard adult film (size #2); #2 bitewing film or long bitewing film (size #3), (Figure 4) and may include anterior bitewings.  It is generally recommended to use 20 films --- four bitewings and 16 periapicals.  Eight anterior #1 films will allow for ease of film placement on patients with narrow palates.  However, in some cases six anterior periapicals will cover the area needed.  

By using #3 film only one film is used on both the right and left sides and opening both the premolar and molar contacts on one film is very difficult. (Figure 5)  With the use of #2 films for bitewings, the operator uses a total of four films. 

Each film is assigned either premolars or molars. (Figure 6)  Use of the #2 films instead of #3 films for bitewings is not only more comfortable for the patient but is easier for the operator to open the contacts.

Figure 5

Figure 6

Edentulous Adult Survey
By definition, an edentulous patient is one without the natural dentition, and a partially edentulous patient is one who retains some, but not all of the natural dentition.  Merely because a patient’s clinical exam reveals an edentulous state does not disqualify him or her from diagnostic radiographic examination.  In fact, it is commonly accepted that certain areas of the patient’s jaws may contain tooth roots or impacted teeth.  Residual infection, tumors, cysts, or related pathology may also be found, which, while not visible to the clinician, would hinder the effectiveness and comfort of an appliance such as a denture and could potentially cause life threatening conditions to the patient.  In addition to the hidden pathology mentioned above, edentulous surveys reveal the position of the foramina and the type of bone present.
In the case of the partially edentulous patient, placement of the film holding device may be complicated by its tendency to tip or slip into the voids which would normally be occupied by the crowns of the missing teeth.  This can usually be overcome by placing cotton rolls between the patient’s alveolar ridge and the film holder, thereby supporting the film holding device in position.
A 14 or 16 film intraoral periapical survey will usually examine the tooth bearing region in most edentulous patients (Figure 7).  Bitewings are not needed because there are no interproximal areas to be examined.

Figure 7

The use of film holders allow the paralleling technique to be used with edentulous patients.  The operator may be able to reduce radiation exposure in the edentulous patient by 25% by using the paralleling technique.  The film can be held in biteblocks to which cotton rolls have been taped.  To prevent patient discomfort on biting due to missing teeth and resultant over-closing of the arches, the cotton rolls can be attached to the upper and lower surfaces of the biteblocks.  Opposing arch denture or partial denture appliances can be left in place to make contact with the biteblock.
The radiographic film should be positioned with approximately one-third of the film’s vertical dimension protruding beyond the alveolar ridge; that is, the radiographic image should occupy two-thirds of the film. The horizontal angulation of the central beam is perpendicular to the film in the horizontal plane.  If bisecting, the vertical angulation of the central beam is much increased for an edentulous patient with minimal ridges.  The film placement may be similar to that of an occlusal film, and this flat film placement is the principal cause of dimensional distortion.  To determine vertical angulation it is necessary to estimate the long axis of the ridge instead of the tooth.



Mixed Dentition Survey
The full mouth survey for pediatric patients may vary, depending on the patient’s age, eruption pattern, behavior, and the size of the child’s mouth. In the six to nine-year-old group, a 12 film survey, using #1 narrow film is recommended, and would include:

• Maxillary:
• Central incisors
• Right and left lateral incisors and canines
• Right and left primary/permanent molars
• Mandibular:
• Central incisors
• Right and left lateral incisors and canines
• Right and left primary/permanent molars
• Bitewings:
• Right and left primary/permanent molars

An adult-sized periapical film is used in the posterior region if the child’s first permanent molar is fully developed.  The size of the tooth requires the use of a large periapical film to capture the complete image.

Pre-School Child Survey
Since pre-school children have smaller mouths, reduced size pediatric films (film size #0) are used to examine the posterior teeth, and adult films are used for anterior examinations in children who have only primary (deciduous or "baby") teeth.  For this group, an eight film survey is recommended.

• Maxillary:
• Central incisors
• Right and left primary molars
• Mandibular:
• Central incisors
• Right and left primary molars
• Bitewings:
• Right and left primary molars 
  

The paralleling technique should be used whenever possible.  This technique delivers the lowest dose of radiation possible.  The bisecting angle technique is a viable alternative for pediatric radiography because the apices of the permanent molar teeth tend to lie above the palate and below the floor of the mouth in the undeveloped mandible.  These positions prevent the image of the apices of the teeth from being projected into the oral cavity when the x-ray beam is perpendicular to the long axis of the teeth as it is when using the paralleling technique.

Quiz

1. What should be done before any radiographic examination?
2. What are the fundamental rules of radiography?
3. What is the purpose of the intraoral periapical examination?
4. What are the two primary techniques used in periapical radiography?
5. What is the primary purpose of bitewing radiographs?
6. What else can be accurately assessed with bitewings?
7. List five indications for taking occlusal radiographs.
8. What sizes of periapical films are commonly used in a dentulous adult survey?
9. Why should a radiographic examination be performed for a clinically edentulous patient?
10. How should film be positioned relative to the alveolar ridge?

Answers

1. A good clinical examination should be carried out before every radiographic examination.
2. The central beam should pass through the area to be examined and the x-ray film should be placed in position to record the image with the least amount of distortion.
3. To obtain a view of the entire tooth and surrounding structures.
4. Paralleling and bisecting angle technique.
5. The detection of caries in the early stages of development.
6. The detection of periodontal disease in the early stages.
7. Detection of pathological lesions; fractures of the mandible and maxilla; foreign bodies; salivary calculi; localizing unerupted teeth.
8. Number 1, 2 and 3 film.
9. It is commonly accepted that certain areas in the jaws may contain roots, impacted teeth, residual infections, tumors, cysts, etc.
10. The film should be placed with approximately one-third of the vertical dimension protruding beyond the alveolar ridge.